Coating Price

  • There are three types of pricing : floor area standard, type standard such as location and vehicle type, and coating area standard.

  • If you do not know the floor area or want to coat only a specific part, please feel free to contact us.

 
 
house.gif
For housing ( interior coating )
Room
(floor area standard)
Coat walls, wall-mounted furniture, curtains, ceilings, and ceiling lighting fixtures.
Standard unit price
(Per floor area)
4900.gif
6.gif
¥ 48,000
8.gif
¥ 64,000
10.gif
¥ 80,000
12.gif
¥ 97,000
  • The price does not include the floor because the coat is not suitable for some dark flooring.
  • Coating on tatami mats and carpets is available at an additional charge.
  • If the ceiling height exceeds 3m, we will quote it separately.
  • Since it is necessary to polish the glass surface for installation on window glass, we will quote it separately.
(Price including tax)
1畳=1 tatami mat area =1.65㎡
Each part
(type standard)
toilet.gif
genkan.gif
yokushitsu.gif
senmen.gif
kitchen.gif
¥ 27,000
¥ 38,000
¥ 38,000
¥ 33,000
¥ 38,000

Bath

Room

Entire room

Including

shoe rack

Including

under the sink

Walls and ceilings

Entire room

Rest Room

Entrance

kitchen

Wash Room

(Price including tax)
car.gif
For automobile
(type standard)
kogata.gif
keitora.gif
1box.gif
kei.gif
sedan.gif
¥ 11,000
¥ 22,000
¥ 27,000
¥ 33,000
¥ 44,000

Kei Truck

Kei Car

Small Car

Sedan, Wagon

One Box

bus.gif
cabcon.gif
microbus.gif
¥ 60,000
¥ 77,000
¥ 99,000

Micro Bus

​Camper Van

Small Bus

​Camper Cab

Large Bus

​Camper Bus

(Price including tax)
Coat entire interior of the car except the window.
Please note that construction in strong winds / rainy weather is not possible except in the garage.
Package price for stores and facilities
※Please use for general housing.
(Floor area standard)
Standard unit price
Coat everything in the area such as walls, ceilings, floors, lighting fixtures, blinds, tables, counters, and infection control equipment.

Excludes electronic devices, high-gloss materials, glass, and fluorine-processed parts.

There are other materials and surface treatments that cannot be coated.

If the number of products to be coated is small, we will give you a discount from the package price by quotation.
The price of additional floors of houses and coatings on simple flat surfaces will be calculated based on the area.
Other, simple flat surfaces
(Coating area standard)
Standard unit price
7900.gif
1980.gif
Differences in standard pricing
Differences in housing, packages for stores and facilities, and other coatings
※Coating red colored part
AAA.gif
​For housing(floor area standard)
Coat walls, wall-mounted furniture, curtains, ceilings, and ceiling lighting fixtures.
​Ex: When the floor area is 20㎡ 20 X 4,900 = ¥98,000 
BBB.gif
Package price for stores and facilities
floor area standard)
Coat everything in the area such as walls, ceilings, floors, lighting fixtures, blinds, tables, counters, and infection control equipment.
Ex: When the floor area is 20㎡ 20 X 7,900 = ¥158,000 
CCC.gif
​Other, simple flat surfaces
(Coating area standard)
Coat flat surfac
Ex: When the floor area is 20㎡ 20 X 1,980 = ¥39,600 
  • All prices do not include tax.

  • Payment can be made by cash or bank transfer.

 
 
 

Please confirm

New Titantex coating has following restrictions and  limitations.

  • It cannot be coated on water-repellent / waterproof surface, fluorinated paints or fluorinated materials.

  • We do not guarantee complete deodorant and antifouling effects on the coated materials.

  • It is not possible to remove mold and dirt that have already adhered.

  • We do not guarantee protection against viruses and bacteria.

  • The effect is semi-permanent, but the coating may peel off due to deterioration of the base material or frequent friction.

  • The coating on glossy metal and some plastics may come off easily due to friction.

  • The coating can make it difficult to pre-process of the surface when repainting.

  • Please allow 100V power supply for coating work. There is also a compressor noise.

  • Since the generator is used for outdoor work such as car coating, it makes a loud noise.

  • In case of rain or strong wind, outdoor work for coating cars etc. become impossible and will be rescheduled.

  • It takes about 1 hour to half a day to dry after coating.

<Contact>

We may not be able to answer the phone during construction, so it is better to contact us via form or by e-mail.

Click here for inquiry form

STEP1

<Quotation>

We will calculate price based on the information you contact us and reply to you by e-mail. If you need a quote, we will send it to you.

We may ask for additional information for a quote.

STEP2

<Consideration>

Please contact us when ordering.

<Arrange schedule>

We will adjust the schedule as soon as you contact us.

STEP3

Please note that the schedule for outdoor work such as car coating will be readjusted in case of rain or strong wind.

STEP4

<Confirm quotation:at site>

We will confirm the details with the customer before work on.

After confirmation, we will give you the final quotation.

There will be no price fluctuations after this.

The cleanliness measurement service will be provided at the same time as confirm quotation.

<Order>

Please fill up the order form.

It doesn't cost so much.

STEP5

<Work on:at site>

We will start work after receiving order from customer.

STEP6

<Payment:at site>

Please pay by cash or PayPay.

We will issue a receipt on the site.

In case of bank transfer, we will issue an invoice.

Please contact us by using the form on this web page, E-mail, or telephone.

Click here for inquiry form

  • We will arrange the schedule of your visit in a non-face-to-face manner. (If you wish, we will visit you)

  • There is no charge until you place an order, including the cleanliness measurement service. *

  • There are no costs other than those stated in the quotation.

Order flow

* Customers outside the business area will be charged a separate transportation fee.